|
| |
 6.01 Transitional Mass Irons
& Metals
The game of golf has changed dramatically over the past
decade, and the demands on the performance of equipment have reached a new
level. Technology has produced many innovations in golf equipment, and there has
been the need to harness that technology with form and function and produce a
set of irons, classical wedges, Drivers and fairway metals specifically for left
handers, often the forgotten people of golf. For these people, there is now the
GCR 6.01 series, available ONLY in left hand!
  
The GCR 6.01 iron featuring Transitional Mass technology is a
high performance cavity iron designed for players seeking the ultimate in feel,
workability, shot control and overall performance while maintaining the profile
of a classic blade. Transitional Mass technology in simple terms is
progressively biased lineal weight movement throughout the set to create a lower
centre of gravity in long irons to make it easier to get the ball airborne, and
a higher centre of gravity in the short irons to produce a lower, more
controlled ball flight. Transitional Mass weight distribution is also employed
in the face thickness of each iron throughout the set that concentrates more
mass in the exact centre of gravity in each iron for unmatched feel, feedback
and forgiveness.
Complementing the irons are a pair beautifully shaped hand forged wedges that
can be “opened” as much as required, but still presents to the ball for
maximum control. The parallel trailing edge of the 56o Sand Iron is
evident to eliminate side spin and the graduated 14o bounce allows
effortless bunker recovery, while being equally at home when “nipping” the
ball from the fairway. The longer than normal hosel has been employed for two
reasons; to create a softer feel (the longer hosel absorbs more impact shock),
and to move the centre of gravity higher, in order to reduce ball “skid”,
and so that trajectory will be controlled in windy conditions and the ball will
not “float around”. The tear drop design allows the player to lay the blade
open and maintain the beautiful clean lines that blend into the neck of the
club, or equally, to close the blade at set up via the radiused sole and hand
ground trailing edge. This is an outstanding sand iron. A classical round design
Lob Wedge, but with a wider flange, slightly cambered and with 10o
bounce completes the set.
The left hand transitional mass metals mirror the technology
of their right hand cousins; from the application of different grades of
stainless steel through to the varying tungsten weight ports. The 10.5o Driver
and #3 and #5 fairway metals will partner the 6.01 irons and wedges to make the
perfect set of golf equipment for left handers.
|
GCR 6.01 Irons |
#2 |
#3 |
#4 |
#5 |
#6 |
#7 |
#8 |
#9 |
#P |
#S |
#L |
|
Loft (o) |
17 |
20 |
24 |
28 |
32 |
36 |
40 |
44 |
48 |
56 |
60 |
|
Lie (o) |
58 |
59 |
60 |
61 |
62 |
63 |
63.5 |
64 |
64.5 |
64.5 |
64.5 |
|
Steel Length (“) |
39.5 |
39 |
38.5 |
38 |
37.5 |
37 |
36.5 |
36 |
35.5 |
35.5 |
35.5 |
|
Graphite Length (“) |
40 |
39.5 |
39 |
38.5 |
38 |
37.5 |
36 |
36.5 |
36 |
36 |
36 |
The world class quality in GCR golf equipment is undeniable,
and the result of Transitional Mass technology in the new GCR 6.01 Left Hand
Series is unparalleled ease of achieving straighter shots with optimum
trajectory. And more enjoyment from the game.
|
